Compatible Faucets
Female Aerator
Hidden Aerator
Is Your Faucet Compatible?
Our filters are designed to seamlessly fit with all rounded and removable aerators. If you’re unsure, check our compatibility guide or reach out to us.
Noncompatible Faucets
Square Faucet
Open Faucet
Sensor Faucet
How To Install Your Filter
1. Remove Your Aerator
Unscrew the small tip (aerator) at the end of your faucet. If it’s tight or hidden, use the correct tool to loosen it.
2. Add An Adapter (If Needed)
Choose from the 11 included adapters to match your faucet. Secure it in place with the wrench.
3. Insert The Silicone Ring
Place the silicone ring inside the female-threaded side (threads on the inside) to ensure a tight, leak-proof seal. If leaking still occurs, apply the included plumber’s tape to the threads before tightening.
*Never place a ring between the adapter and the filter head.
4. Attach The Filter Head
Screw the filter head onto the faucet or adapter until it feels snug. Tools are not recommended as they might damage the head.
5. Flush Before Use
Turn on the water and let it run through the filter for about 10 seconds to activate and clean the filter before using it.
How To Replace Your Filter
1. Twist Off The Base
Unscrew the base of the filter head to open it.
2. Insert The New Filter
Place the new filter inside with the sticker side facing upward. Remove the sticker before closing.
3. Twist The Base Back On
Screw the base of the head back on until snug.